Adafruit Swirly Aluminum Mounting Grid for 0.1" Spaced PCBs - 10x5
Adafruit Industries, LLC mail
Aluminum grid designed to allow for easy mounting of various small microcontroller and sensor boards. Each square is 0.6" x 0.6" and there's holes or slots every 0.2 inches. With the various dots and dashes you can pretty much make anything on a 0.1" grid fit. Each drill hole is 0.1" / 2.54mm diameter, the slots are 0.11" x 0.3" (2.75 x 7.5mm) And if that's not good enough, the aluminum is easy to cut/drill/machine/bend if you need more customization. This one is 10x5 'blocks', so 6" x 3" in size or about 150x75mm. Click the link labeled 'Project Website' to find out more.
Version
Rev ALicenses
Certification mark
The OSHW Certification Mark shows the project's unique certification ID and makes it easy for users to quickly find this page along with the project's details. This mark can be used throughout the project's design, documentation, and promotional material.
For more details, take a look at the Certification Mark Usage Guide.
Project Type
Electronics
